Sharpened Long Blade Cigarette Machine Knife For First Cutting Process Of Automatic Cigarette Maker Passim 8000

Sharpened Long Blade For First Cutting Process Of Automatic Cigarette Maker Passim 8000

Cigarette Knife is a component of cigarette making machines to slice cigarette rod before going into the filter assembly machine.

Heat Treatment Of Martensitic Stainless Steels

Austenitizing, in which the steel is heated to a temperature in the range 980–1,050 °C (1,800–1,920 °F), depending on grade. The resulting austenite has a face-centered cubic crystal structure.

Quenching. The austenite is transformed into martensite, a hard body-centered tetragonal crystal structure. The quenched martensite is very hard and too brittle for most applications. Some residual austenite may remain.

Tempering. Martensite is heated to around 500 °C (932 °F), held at temperature, then air-cooled. Higher tempering temperatures decrease yield strength and ultimate tensile strength but increase the elongation and impact resistance.

Martensitic Stainless Steels

Martensitic stainless steels offer a wide range of properties and are used as stainless engineering steels, stainless tool steels, and creep-resistant steels. They are magnetic, and not as corrosion-resistant as ferritic and austenitic stainless steels due to their low chromium content. They fall into four categories (with some overlap):

Usages

Ferritic stainless steels are cheaper than austenitic steels and are present in many products, which include:

Automobile exhaust pipes (Type 409 and 409 Cb[2] are used in North America; stabilized grades Type 439 and 441 are used in Europe)

Architectural and structural applications (Type 430, which contains 17% Cr)

Household goods, such as kitchenware, sinks, and major appliances

Building components, such as slate hooks, roofing, and chimney ducts

Power plates in solid oxide fuel cells operating at temperatures around 700 °C (1,292 °F) (high-chromium ferritics containing 22% Cr)